MacCentre
Форум: Mac и Mac OS X
Тема: 10.5 на младшую лампу - можно?
Страницы: 1 [2]

[Ответить]
Polosatiy_io [24.09.2008 20:48] :
Весьма а зачем? :)
Весьма [24.09.2008 21:34] :
Polosatiy_io
Совершенно незачем) просто Злыдень говорил именно об этом, а не может ли Классика собственно запускаться.
STAB [25.09.2008 13:39] :
Какие разноречивые мнения! )) Похоже придется все-таки самому ставить и смотреть.
Вот только я не в курсе, что такое "Лео для маленьких". Это тот дистрибутив который на старые машинки ставится?
Весьма [25.09.2008 14:53] :
STAB
Это дистрибутив, на котором сняты системные требования (напоминаю, минимальные официальные требование для Лео – 867MHz PowerPC G4).
STAB [25.09.2008 15:08] :
А у него есть какой-то код или номер релиза? Чтобы начать искать уже по просторам интернета.
Весьма [25.09.2008 15:10] :
STAB
В личку.
STAB [25.09.2008 16:49] :
Угу
GreenSnake [26.09.2008 03:05] :
Не надо искать. Можно всё сделать с нормальным диском Leo.
Вот рецепт из нета давно найденный и опробованный. Работает.

There are two parts to this solution; the first part covers installing Leopard on an unsupported 700mhz G4 iMac, and the second part fixes the sleep issues with the graphics drivers.

Part One: Installation using the DVD installation disk. The instructions below pretend that the iMac is an 867Mhz model. The change is temporary; after reboot the settings are lost.
Insert installation DVD
Reboot
Hold down Command-Option-O-F to boot into open firmware
At the prompt (>), type the following (note that the 0 below is a zero)
dev /cpus/PowerPC,G4@0
d# 867000000 encode-int " clock-frequency" property
boot cd:,\\:tbxi
After the install disk has booted, you must load Terminal from the menu and enter the following:
pmset -a displaysleep 0 halfdim 0 sleep 0 disksleep 0 force
To verify your changes, type pmset -g. If this is not done, the install will freeze when the display or system tries to sleep during the install.
After installation, go to the Energy Saver System Preferences panel, and set the machine to never sleep.
Read on for the sleep issue solution...

Fix the sleep issues by replacing the graphics drivers with the 10.4 drivers:
Back up all of the GeForce* and NVDA* files in /System/Library/Extensions.
Replace those drivers with the 10.4 files, ie. GeForce2MXGLDriver.bundle, GeForce.kext, etc. Note that there is not a one-to-one relationship with each file.
Change ownership of the files as follows:
bash$ sudo chown -Rh root:wheel GeForce* NVDA*
bash$ sudo chmod -R a+rX,u+w,go-w GeForce* NVDA*
Reboot
This should work with other unsupported models.
Весьма [26.09.2008 08:38] :
Ужос какой)
[Ответить]
[< Назад]